Optional power supply for use in power chaining up to four UHD-EX series transmitters.

- Power supply for remote powering for powered devices on HDBaseT™ transmission lines
- Mid-span power supply
- Power switches for incoming and outgoing line
- Supports 4K/UHD signals

-The Atlona captive screw ready IR cable features pre-stripped wires at one end to save time and make insertion easier.
- 2 meter length
- 28 AWG
- Nickel-plated connector
- PVC molding

- The Atlona captive screw ready 2 channel unbalanced audio cable features pre-stripped wires at one end and RCA connectors at the other, to save time and make insertion easier.

- The Atlona 6ft USB to 5V DC power cable with locking function is capable of powering many of the Atlona devices which are based on the 5V DC circuit.
- This cable is perfect for users who do not have an electrical power outlet next to the switch or extender; however do have a cable box with USB interface, computer with USB interface or even a USB hub.

- IR Emitter designed for Atlona UHD-PRO3 Series matrix switchers and UHD-EX Series extenders
- Red status LED provides positive indication that emitter is operational and transmitting
- Two-pin conductor cable with stripped ends; Signal and Ground conductors
prevent interference from other IR devices

- IR Receiver designed for Atlona UHD-EX Series extenders
- Uses standard, 12 volt-based system
- Red status LED provides positive indication that the receiver is capturing a signal from the IR remote control
- Three-pin conductor cable with stripped ends; Signal, Ground, and Power conductors