STEINBERG UR824 ออดิโอ อินเตอร์เฟส 24-in 24-out USB 2.0 Audio Interface with 8x XLR combo , w/ DSP FX UR-824 ADAT, 24-bit/96Hz , Word clock I/O with 2 BNC connectors plus JetPLL ultra-low jitter support
The UR824 interface conveys pristine, transparent audio quality through various analog and digital I/O formats, offering convenience for studio and stage alike. Connecting to Mac or PC via high-speed USB 2.0, the rackmountable UR824 boasts 24 channels with 8 premium D-PRE mic preamps alongside its dspMixFx technology for latency-free monitoring with effects, also available as native VST 3 plug-ins.
The UR824’s front panel hosts two Neutrik combo TRS/XLR connectors for balanced microphone/line input with switchable 48 volt phantom power and Hi-Z, pad push buttons for signal attenuation, gain controls with peak indicators. On the right hand side there’s a single output level rotary knob that allows you to easily adjust the levels of the eight line output signals alongside two headphone connectors, each with a dedicated level control. The output signal to be controlled by the front panel rotary is selected through the software.
The rear panel provides six Neutrik combo TRS/XLR inputs and eight analog balanced TRS outputs as well as two pairs of optical ADAT inputs and outputs. Also on board are two BNC connectors for switchable word clock input and output. Developed by using advanced technologies to offer seamless scalability, this mixing and recording interface offers options to expand the number of analog inputs and outputs across the system via ADAT to provide up to 24 input and output channels.
The UR824 is a perfect solution for band recording. Mount the UR824 in your rack and with the range of channels and connectors, pick up all the band’s instruments and vocals and record and mix them in Cubase AI or your preferred DAW. For live rigs, the UR824 offers inputs and outputs over a variety of formats, the two pairs of ADAT of which provide additional I/O expansion capability. Connect either to two 8-channel mic preamps with ADAT outputs or two UR units in standalone mode to get a stunning 24 channels for recording an entire rock band setup.
- Features
- 24-bit/96Hz USB 2.0 audio interface
- Analog 8-in and 8-out with 8 D-Pre Class-A mic preamps supporting +48 V
- 2 pairs of ADAT optical I/O (doubles as S/PDIF) provide 16-in and 16-out (S/MUX compatible, 8-in and 8-out @ 96kHz)
- Latency-free DSP-powered monitoring with one REV-X reverb and 8 Channel Strips with any DAW by using the latest dspMixFx technology
- Native VST 3 plug-ins of REV-X and Sweet Spot Morphing Channel Strip additionally included
- 2 separate headphone buses with individual outputs
- Word clock I/O with 2 BNC connectors plus JetPLL ultra-low jitter support
- Cubase AI 6 music production software included
- Cross-platform compatibility for Mac OS X and Windows